Using A Memory Card; Removing The Memory Card Cover - Canon ME20F-SHN Setup Manual

Using a Memory Card

Using a Memory Card
Insert a memory card before installing the camera.
NOTES
• For recording onto a memory card, the following settings are required.
System frequency: 59.94 Hz
20
Frame rate: 29.97P
Resolution: 1920 x 1080
Memory card slot
Memory card cover

Removing the Memory Card Cover

Place your fingers on the left edge of the memory card cover and pull to remove.
Place the memory card in the memory card slot.
To remove the memory card, push it in all the way until the card slightly pops out and remove.
IMPORTANT
• Make sure to turn off the camera before this operation.
• When using a memory card with the camera for the first time, it is recommended to format the card after
inserting it into the camera (A Network Operation Guide).
• Always unmount the memory card before removing it (A Network Operation Guide).