Setting The Camera Angle; Launching The Camera Angle Setting Tool; Connecting To The Camera - Canon VB-H43 Operation Manual

Setting the Camera Angle

Use the Camera Angle Setting Tool to adjust the camera angle when installing the camera or to change the capture
orientation according to the situation.
The following gives an overview of the settings that can be made with the Camera Angle Setting Tool.
Pan, Tilt, Rotation, Zoom, Image Flip, Focus
Zoom, Image Flip, Focus
Important
• The Camera Angle Setting Tool is included for angle adjustment during camera installation only and is not intended for daily use.
Overuse may cause the camera to malfunction.
• After changing settings in the Camera Angle Setting Tool, check the settings in the Setting page and Admin Tools operate as intended.
• The Camera Angle Setting Tool cannot be used via a proxy server.
• Upload functions cannot be used while the Camera Angle Setting Tool is connected.

Launching the Camera Angle Setting Tool

Double-click the Camera Angle Setting Tool icon on
1
the desktop to launch the Camera Angle Setting Tool.
Note
You can also launch the Camera Angle Setting Tool from the
Camera Management Tool. For details, please refer to the
Camera Management Tool user manual.

Connecting to the Camera

Click [Connect] from the [File] menu.
1
The [Connection settings] dialog box will appear.
36
Enter each item for the camera to connect to and click
2
[OK].
[Host Name]
Enter the host name or IP address of the camera (p. 28).
[Administrator User Name]
Enter the administrator user name for the camera
(p. 28).
[Administrator Password]
Enter the administrator password for the camera
(p. 28).
[Enable SSL Communications] checkbox
Select this checkbox to connect to the camera using
SSL communications. Normally SSL communications
are not used (factory default setting) (p. 81).
[Port]
Set the HTTP port number to 80, 443 or in the range of
1024 to 65535. Normally [80] (factory default setting)
is used (p. 70).