Canon VB-H43 Operation Manual page 81

(6) [Display Server Certificate Details]
Click [Exec] to view the details of the server
certificate.
(7) [Display Self CA Certificate]
Used for the purpose of testing SSL communications,
but otherwise not normally used.
(8) [Backup]
Click [Exec] to perform a backup of the certificates
and private key. This operation can only be performed
when [HTTPS Connection Policy] is set to use [HTTPS]
or [HTTP and HTTPS], and SSL communications are in
use.
(9) [Restore]
Installs the certificates and private key from
backup. Click [Browse] to select the backup file,
then click [Exec]. This operation can only be
performed when [HTTPS Connection Policy] is set to
use [HTTPS] or [HTTP and HTTPS], and SSL
communications are in use. The restored certificate
will take effect after rebooting.
Encrypted Communications
(1) [HTTPS Connection Policy]
Select whether or not to use SSL communications with
HTTPS connections.
To not use SSL communications, select [HTTP].
To use SSL communications, select [HTTPS] or [HTTP
and HTTPS]. SSL connections will be possible after
rebooting.
When [HTTPS] is selected, even HTTP connections
will be redirected to HTTPS and SSL communications
will be used.
Important
• Even if SSL communications are set here to be used, they will
not be used if the certificate is not installed.
• Video transmission performance will drop, if SSL
communications are used. When [HTTPS] is selected,
communication with RM is not possible.
Note
• It may take a few minutes to generate an SSL key.
• Depending on the type of the certificate being installed on the
camera, a dialog box may appear indicating that the web
browser has accepted the certificate and a connection can be
made.
If the dialog box does not appear, register the CA certificate in
the web browser.
[SSL/TLS] Setting HTTP Communication Encryption
4
81