Canon VB-H43 Operation Manual page 175

S410 Event service initialization error [crit]
Description event initialization error [%1] [%2] (S410)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
event service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
S411 External input/output service initialization error
[crit]
Description extio initialization error [%1] [%2] (S411)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
external input/output device service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
S412 Timer service initialization error [crit]
Description timer initialization error [%1] [%2] (S412)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
timer service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
S413 Timer service runtime error [crit]
Description timer working error [%1] (S413)
%1 Error number
Meaning An error occurred while the timer service
was running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Camera Messages
C001 Starting and stopping of camera control module
[info]
Description %1 camerad (C001)
%1 starting | stopping
Meaning The camera control module started/
stopped.
C002 Camera application started [info]
Description starting cameraappl (C002)
Meaning The camera application started.
C201 Day/Night Mode switching warning [warning]
Description Can't switch Day/Night mode, because
current mode is Auto. (C201)
Meaning Day/Night Mode could not be switched.
Countermeasure Set Day/Night Mode to manual.
C211 Camera control command overflow [warning]
Description command queue overflowed (C211)
Meaning The camera control command queue
overflowed, and some commands were
discarded.
Countermeasure Allow a longer interval (200 ms) for sending
the camera control command.
RTP-related Messages
R001 Startup of RTP distribution module [info]
Description starting media_plane (R001)
Meaning RTP distribution module started.
R002 Stopping of RTP distribution module [info]
Description stopping media_plane (R002)
Meaning RTP distribution module stopped.
R003 RTSP PLAY request received [info]
Description PLAY received: client_IP=%1, profile=%2,
num_of_sessions=%3 (V=%4, A=%5,
M=%6, BC=%7) (R003)
%1 Client IP address
%2 Profile name of requested PLAY
%3 Total number of client sessions
%4 Total distribution count of Video stream
%5 Total distribution count of Audio stream
%6 Total distribution count of Metadata stream
%7 Total distribution count of
AudioBackChannel
Meaning RTSP PLAY request was received.
List of Log Messages
7
175