Canon VB-H43 Operation Manual page 124

Important
Perform a detection test in advance to make sure that the
detection frame continues to be displayed for a subject
targeted for passing detection.
Note
• A ratio of up to 30% can be set for [Object Size (%)] in passing
detection.
• A passing detection event is notified only when the decision
line is crossed. Take care in setting the operation to be
performed when an event occurs.
Setting by Right-Click Menu
Right-click on the Intelligent Function Setting Tool display
screen to display the menu. There, the following functions
can be used.
[Copy detection area/line]
Copy the detection area/line of the detection setting
selected.
[Paste detection area/line]
Paste the copied detection area/line to the detection
setting selected. It cannot be copied to camera tampering
detection. Pasting a detection line is possible only when
the source and the target both set passing detection.
[Clear detection area/line]
Clear the detection area/line of the detection setting
selected. It cannot be cleared in camera tampering
detection.
[Copy detection criteria settings]
Copy the detection criteria of the detection setting
selected.
[Paste detection criteria settings]
Paste the copied detection criteria to the detection setting
selected. Pasting is possible only if the source and the
target are the same detection type.
[Copy event settings]
Copy the event operations of the detection setting
selected.
[Paste event settings]
Paste the copied event operations to the detection setting
selected.
Reducing effects of lighting change
Intelligent functions may not work when the entire screen
is exposed to sudden changes in brightness, for example,
when indoor lights are turned on or off. Changing the
detection settings may reduce this effect.
1 Click [Detection Settings].
124
Select [Reduce effects of lighting change].
2
3 Click [Save settings].
Important
A [Reduce effects of lighting change] setting may not work
depending on the operating environment. Sudden changes in
brightness that persist may also have the same effect. Perform
a detection test to check what will work.
Note
Since changing [Detection Settings] restarts the intelligent
functions, detection will not be performed during the tens of
seconds that it takes to complete a restart.
Displaying Event Status
Click the [Event Display] button to open the event display
panel and confirm the detection status icon of the
intelligent functions.
This panel displays the same information as [Intelligent
Function (Image Detection)] in the event display panel of
the Admin Viewer. For details, see "Displaying Event
Status" (p. 158).
Note
If the detection setting is not stored in the camera, only the
detection status for the currently selected detection setting is
displayed.