Canon VB-H43 Operation Manual page 170

A470 Uploader initialization failed [crit]
Description uploader initialization failure - %1 (A470)
%1 Error number
Meaning The uploader could not be initialized.
Countermeasure If the problem persists after rebooting the
camera, the camera is faulty, arrange for
servicing.
Application (Audio Server) Messages
B001 Starting and shutdown of audio server [info]
Description %1 audio. (B001)
%1 starting | stopping
Meaning The audio server was started/shut down.
B011 Audio client connected [info]
Description [%1] %2 connected n=%3 (B011)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was connected.
B012 Audio client closed [info]
Description [%1] %2 closed n= %3 (B012)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was disconnected.
B101 Error request received [notice]
Description %1 unusual request [%2] (B101)
%1 Client host IP address
%2 Error type (400 | 404)
Meaning The request was denied due to a command
error (400) or parameter error (404).
170
B102 Client connection denied [notice]
Description %1 request denied [%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Meaning Client connection was denied due to an
authentication error (41), time specification
error (42), insufficient resource (43),
specification of unsupported codec (45),
specification of unpermitted user level (47),
too many clients (49) or invalid operation
mode (4a).
Countermeasure 41: Check user name, password or user list
used when connecting. 42: Check playtime
or maximum connection time settings used
when connecting. 43: Reconnect or restart.
45: Use supported client software. 47:
Check user level used when connecting. 49:
Check client number settings. 4a: Check if
usage of audio server is enabled.
B103 Client forcibly disconnected [notice]
Description %1 access denied [%2] (B103)
%1 Client host IP address
%2 Denial type (41 | 42 | 4a)
Meaning Connection was initially permitted, but the setting
has subsequently been changed to prohibit
access, thereby triggering a forced disconnection
(the denial type is the same with B102).
B201 Event notification failure [info]
Description cannot notify %1 event [%2] (B201)
%1 Event type (ald)
%2 Error number
Meaning The event notification failed.
B202 Event reception failure [info]
Description cannot recv event [%1] (B202)
%1 Error number
Meaning The event could not be received.
B203 Audio message send error [info]
Description audio message send error %1 [%2] (B203)
%1 Message type
%2 Error number
Meaning The audio message could not be sent.