Recording To A Memory Card Manually - Canon VB-S30D Operating Manual

Example:
Setting 1: Image Detection status ON
Other settings: Image Detection status OFF
Note
The icon signifying Detection mode will be displayed for a
maximum of five minutes (except for Moving Object Detection).
(3) [Intelligent Function (Volume detection)]
The volume detection status is displayed. When
sound that meets the criteria selected under [Event] >
[Volume Detection] in the Setting Page is detected,
the icon turns green (p. 60).
Example:
Volume Detection status ON

Recording to a Memory Card Manually

Video displayed in the Admin Viewer can be manually
recorded to a memory card.
Note
• To record on a memory card, a memory card must be inserted
in the camera (p. 130) and [Save Logs and Videos] must be
selected in the setting page > [Memory Card] > [Operation
Settings].
• The format and size of the video recorded on a memory card
depends on the settings made on the Setting page.
Video format: [Memory Card] > [Video Format]
Video size: JPEG [Video] > [JPEG] > [Video Size: Upload /
Memory card]
H.264 [Video] > [H.264(1)] > [Video Size]
Recording Videos Manually
If you have not yet obtained the camera control
1
privileges, click the [Obtain/Release Camera Control]
button and obtain the control privileges.
Performing Operations and Settings in the Admin Viewer
Click the [Start/Stop Memory Card Recording] button.
2
The [Start/Stop Memory Card Recording] button
appearance changes as shown below depending on
recording status.
Not recording
Recording
3 To stop video recording, click the [Start/Stop Memory
Card Recording] button again.
Important
• Recording to the memory card will be terminated when the
length of manually recorded videos exceeds 300 seconds
from the time recording started.
• When recording manually, do not change the settings in the
[Setting Page]. Doing so may result in the termination of the
manual recording.
Confirming Manually Recorded Video
Use the Recorded Video Utility (p. 118) to confirm video
manually recorded to a memory card.
Click the [Recorded Video Utility] button to start the
Recorded Video Utility from the Admin Viewer.
5
147