Setting The Preset - Canon VB-H43 Operation Manual

(11)[Detailed Settings]
Show the detailed settings.
(11)-1 [Show in viewers] checkbox
Select this checkbox to use presets in the
viewer. When the [Home Position] is selected in
(8), this function is grayed out.
(11)-2 Camera Parameter
Enter the center angle of the desired angle in
[Pan] and [Tilt]. In [Zoom], enter the view angle.
• Camera Angle
[Pan] ..... Set the pan position of the camera.
[Tilt] ....... Set the tilt position of the camera.
[Zoom] .. Set the viewing angle of the camera.
• [BLC] (Back Light Compensation)
Select [OFF] or [ON] for the BLC setting of the
camera.
The display is grayed out if [Smart Shade
Control] is set to [Auto].
• [Smart Shade Control]
Select [OFF], a level from [1] (Mild) to [7]
(Strong) or [Auto] for the smart shade control
setting of the camera. (p. 152)
• [Haze Compensation]
Select [Disable], one of 7 levels from [1] (Mild)
to [7] (Strong), or [Auto] for the haze
compensation of the camera. (p. 152)
• [Focus Mode]
Select [Auto], [Manual], or [Fixed at infinity] for
the focus mode of the camera. (p. 153)
• [White Balance]
Set the white balance of the camera to [Auto]
or according to the light source of the
condition in which it is used. For details on
light sources, see p. 57.
• [R Gain], [B Gain]
If white balance is set to [Manual], set the
respective gains to a value between 0 and
1023.
(12)[Get camera info]
Load the current camera angle and other settings of
the video display area to reflect them in the panorama
screen and camera parameter settings.
(13)[Full Image]
Displays the full image obtained from the camera. A
preset preview frame (yellow) reflecting the preset
settings is shown. If you drag to resize or move the
frame, the new frame is reflected in the preset
settings.
(14)[Update Image]
Load the full video from the current camera to update
the video.
108
(15)[Show in viewers] checkbox
Select this checkbox to use presets in the viewer.
When home position is selected in (8), this function is
grayed out.
(16)Camera Parameters
Displays the values for the pan and tilt positions and
zoom viewing angle in accordance with the size and
position of the preset preview frame on [Full Image].
(17)[Get Digital PTZ Info]
Load the current crop position of the video display
area to reflect it in the preset preview frame in [Full
Image] and the camera parameters.
(18)[Preview settings]
Preview the image with the camera parameter values
that are being edited in the video display area.
(19)[Clear settings]
Delete the settings for the preset selected.
(20)[Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
(21)[Save settings]
Save the edited preset settings in the camera.
If presets have been set, be sure to save the settings
by clicking [Save settings].

Setting the Preset

Select presets or home position as needed for the
operating environment or desired objectives. A preset can
be set in the following ways.
Note
The number of presets you can register are as follows.
– Maximum 64
–
Setting from Camera Angle in the Video
Display Area
Select the preset you want to set from the [Home
1
Position/Preset] selection box, and then fill the [Preset
Name] field.
Be sure to enter the preset name.
Maximum 20