Canon VB-H43 Operation Manual page 38

Select the camera specification file and click [Open].
3
The camera specification file will be loaded and
camera names listed will be displayed under [Camera
List].
Note
• The [Select Camera] dialog box will remain open unless the
Camera Angle Setting Tool is shut down or the X at the top
right of the dialog box is clicked.
• The camera list is discarded when the Camera Angle Setting
Tool is shut down. Load the camera specification file the next
time you launch the Camera Angle Setting Tool.
38
Connecting to the Camera
From the camera list, select the camera to connect to and
click [Connect].
Connecting to the Next Camera on the List
Camera list
Click [Next] to disconnect the camera currently
connected and connect to the next camera on the list.
Note
In [Detailed Information], information for the camera selected in
the camera list is displayed.
Camera to be
connected next