Table of Contents
Advertisement
Intelligent Function Settings
Add detection settings.
1
When you click [Add] in the [Detection Setting List],
the [New Detection Settings] dialog box is displayed.
Set the [Detection Setting Number] and [Detection
Type] of the detection setting you want to add, and
then click [OK].
Up to 15 different detection settings can be
registered.
(1)
(2)
(1) [Detection Setting Number]
Specify a detection setting number from 1 to 15 for the
detection area you want to set.
(2) [Detection Type]
Select detection types that suit your purpose from
[Moving Object Detection], [Abandoned Object
Detection], [Removed Object Detection], [Camera
Tampering Detection], or [Passing Detection]. For
details on detection types, see p. 113.
Enable Detection Settings.
2
To enable detection settings, select [Enable these
detection settings].
Clear this checkbox to disable a setting.
Set detection criteria ([Detection Criteria] tab p. 119).
3
Set detection criteria while operating the camera and
checking the image in the video display area.
Set operations to be performed when a change in a
4
subject is detected ([Event] tab p. 120).
Set e-mail notification, video record, and audio
playback to be performed upon detection.
Save the detection settings in the camera.
5
Click [Save settings] to save the settings in the
camera.
Check the detection result.
6
You can check the detection status of the specified
detection settings in the event display panel (p. 158).
Important
Notes on intelligent function settings and operation
• When setting intelligent function, do an actual detection test
to confirm that detection will be performed correctly.
• When the entire screen are exposed to sudden changes in
brightness, detection may not be performed as intended for
up to 5 minutes.
• If the display switches between Day mode and Night mode,
[Restarting intelligent function. Please wait.] is shown and
intelligent function will restart. Detection will not be performed
while intelligent function is restarting.
• If the camera is operated during intelligent function setting or
operation, [Restarting intelligent function. Please wait.] is
shown and intelligent function will restart. Detection will not
be performed while intelligent function is restarting.
• If [Video] > [Video Size Set] on the Setting page is changed,
be sure to change the preset position setting (VB-H43/
VB-M42 only) and intelligent function settings, and check the
operation. The intelligent function may not operate,
depending on the settings.
• Set intelligent function again if the angle of view is changed
through camera operation, or the camera position of a preset
or home position is changed using Preset Setting Tool.
• If [Status] in [Detection Setting List] is [Enabled] when the
camera position is fixed, control privileges cannot be
obtained by VB Viewer or RM Viewer. Also, the preset tour
and auto control of custom settings will no longer run.
• When using presets registered in digital zoom range, the
registered camera positions may not be reproduced with
high accuracy. It is recommended that you use presets
registered in the optical zoom range for the Intelligent
Function.
Difficult-to-detect Subjects
• Objects or portions where there is little contrast in color or
brightness with the background may not be detected.
• Small objects and changes on the screen may not be
detected.
• Partial or entire changes in light on the screen may trigger
detection.
• If multiple objects overlap, the detection status may change.
In particular, passing may not be detected or may be
detected at the wrong timing.
Page 118
Hide quick links:
Advertisement
Table of Contents
