Making N In 1 Copies - Brother MFC-9120CN User Manual

To change the default setting follow the steps
below:
a
Press Menu, 3, 3.
b
Press a or b to increase or decrease the
contrast.
Press OK.
c
Press Stop/Exit.
Brightness
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Options.
Press a or b to choose Brightness.
Press OK.
e
Press a to make a lighter copy or press
b to make a darker copy.
Press OK.
f
Press Mono Start or Color Start.
To change the default setting follow the steps
below:
a
Press Menu, 3, 2.
b
Press a to make a lighter copy or press
b to make a darker copy.
Press OK.
c
Press Stop/Exit.
Color saturation
You can change the default setting for color
saturation.
To change the default setting follow the steps
below:
a
Press Menu, 3, 4.
b
Press a or b to choose 1.Red,
2.Green, or 3.Blue.
Press OK.
12
c
Press a or b to increase or decrease the
color saturation.
Press OK.
d
Return to step b to choose the next
color. Or press Stop/Exit.
.

Making N in 1 copies

(page layout)
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page, which lets you save
paper.
IMPORTANT
• Please make sure the paper size is set to
Letter, A4, Legal or Folio.
• (P) means Portrait and (L) means
Landscape.
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Options. Press a or b to choose
Page Layout. Press OK.
Making copies
12
12
12
.
85