Combining Quick Dial Numbers; Tone Or Pulse - Brother MFC-9120CN User Manual

Chapter 8
h
Do one of the following:
Enter the pinyin using the dial pad
(up to 15 characters).
Press OK.
Press OK to store the number
without a pinyin.
i
You can save a fax/scan resolution
along with the number. Do one of the
following:
If you selected Fax/IFAX in step d,
press a or b to select Std, Fine,
S.Fine or Photo.
Press OK.
If you selected E-mail in step d,
press a or b to select Color100dpi,
Color200dpi, Color300dpi,
Color600dpi, Gray100dpi,
Gray200dpi, Gray300dpi,
B&W200dpi or B&W200x100.
Press OK.
Press OK if you don't want to change
the default resolution.
Note
If you have selected Fax/IFAX in step d
and added One-Touch or Speed-Dial
numbers that are stored as 'I-Fax', you
cannot select S.Fine.
j
If you selected Black & White in step i,
select the file format (TIFF, PDF or
Secure PDF) that will be used to send to
your PC. If you selected Gray or Color in
step i, select the file format (PDF,
Secure PDF, JPEG or XPS) that will be
used to send your PC.
Press OK.
Note
Fax Broadcasting is for black & white only.
You can easily print a list of all your
Speed-Dial numbers. Numbers that are
part of a group will be marked in the Group
column . (See Reports on page 77).
64
Combining quick dial
numbers
You can combine more than one Quick Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate from another long distance
carrier.
For example, you might have stored '555' on
Speed Dial #003 and '7000' on Speed Dial
#002. You can use them both to dial
'555-7000' if you press the following keys:
Press (Address Book), 003.
Press (Address Book), 002 and
Mono Start or Color Start.
Numbers can be added manually by entering
them on the dial pad:
Press (Address Book), 003, 7001 (on the
dial pad), and Mono Start or Color Start.
This would dial '555–7001'. You can also add
a pause by pressing Redial/Pause key.

Tone or Pulse

If you have a Pulse dialling service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
a
Press Hook.
b
Press # on the machine's control panel.
Any digits dialled after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialling service.
8
8