Brother MFC-9120CN User Manual page 165

c
Using both hands, put one blank sheet
of paper in the manual feed slot until the
front edge of the paper touches the
paper feed roller. Wait until the machine
automatically feeds the paper. When
you feel the machine pull in the paper,
let go.
Note
• Make sure that the paper is straight and in
the correct position on the manual feed
slot. If it is not, the paper may not be fed
correctly, resulting in a paper jam.
• Do not put more than one piece of paper
in the manual feed slot at any one time, as
it may cause a jam.
• If you put paper in the manual feed slot
before the machine is in the Ready mode,
an error may occur and the machine will
stop printing.
d
Make sure that the machine is in the
Ready mode.
Press Menu, 4, 8.
Drum Cleaning
Press Start
Troubleshooting and routine maintenance
e
Press Mono Start or Color Start. The
machine will pull in the piece of paper
and start cleaning the drum unit.
Drum Cleaning
Please Wait
f
When the machine has finished
cleaning, Completed appears on the
LCD. Press Stop/Exit so that the
machine returns to the Ready mode.
g
Repeat steps c to f two more times
using a new blank sheet of paper each
time. Upon completion please discard
the used paper. If the print problem is
not resolved please contact your
Brother dealer.
C
155