Sequential Polling - Brother MFC-9120CN User Manual

Note
If the other fax machine that you are
calling has not been set-up for Polling, you
will receive the message
Connection Fail.

Sequential polling

Sequential polling lets you request
documents from several fax machines in one
operation.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 8.
c
Press a or b to choose Standard,
Secure or Timer.
Press OK.
d
Choose one of the options below.
If you choose Standard go to
step e.
If you choose Secure, enter a four-
digit number, press OK, go to
step e.
If you chose Timer, enter the time
(in 24-hours format) you want to
begin polling and press OK, go to
step e.
Note
If you did not enter the correct Secure
Code, you will receive the message
Disconnected.
e
Specify the destination fax machines
you want to poll by using One Touch,
Speed Dial, Search, a Group or the dial
pad. You must press OK between each
location.
f
Press Start.
Press Stop/Exit while the machine is dialling
to cancel the polling process.
To cancel all sequential polling receive jobs,
press Menu, 2, 7. (See Checking and
cancelling waiting jobs on page 43.)
Polling
10
.
10
73