Access Point Mode; Range Extender Mode - TP-Link TL-WR802N User Manual

2.3.3 Access Point Mode

As the supplement of wired LAN, TL-WR802N enables the wired LAN to connect to the Internet
wirelessly.
Connect TL-WR802N to the power and connect the Ethernet cable correctly, you can surf the
Internet by connecting your PC(s) to the router wirelessly.
On this mode, the wired port LAN/WAN works as LAN. The Pre-encryption function is opened by
default and the default password is the last unique eight numbers of each Router's MAC address.
Figure 2-3 Hardware Installation of the TL-WR802N in AP Mode
1. Connect the LAN/WAN port of TL-WR802N to the wired network port with an Ethernet cable.
2. Connect TL-WR802N to the power.

2.3.4 Range Extender Mode

TL-WR802N is used to extend the range of wireless signal of the existing AP or wireless router.
On this mode, the wired port LAN/WAN works as LAN. Computer could connect to the device by
either wired or wireless way.
TL-WR802N 300Mbps Wireless N Nano Router
- 7 -