Quick Setup; Wps - TP-Link TL-WR802N User Manual

MAC Address - The physical address of the Router, as seen from the WLAN.
•
Traffic Statistics - The Router's traffic statistics.

Received (Bytes) - Traffic that counted in bytes has been received out from the WAN port.
•
Received (Packets) - Traffic that counted in packets has been received out from the WAN
•
port.
Sent (Bytes) - Traffic that counted in bytes has been sent out from the WAN port.
•
Sent (Packets) - Traffic that counted in packets has been sent out from the WAN port.
•
System Up Time - The length of the time since the Router was last powered on or reset.

Click the Refresh button to get the latest status and settings of the Router.

6.3 Quick Setup

Please refer to Section 3.2: "Quick Installation Guide."

6.4 WPS

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This
section will guide you to add a new wireless device to an existing network quickly by function. The
WPS function is only available when the Operation Mode is set to Access Point. Select menu
"WPS", you will see the next screen shown in Figure 5-3.
WPS Status - To enable or disable the WPS function here.

Current PIN - The current value of the device's PIN is displayed here. The default PIN of the

device can be found in the label or User Guide.
Restore PIN - Restore the PIN of the device to its default.

Gen New PIN - Click this button, and then you can get a new random value for the device's

PIN. You can ensure the network security by generating a new PIN.
Disable PIN of this Device - WPS external registrar of entering the device's PIN can be

TL-WR802N 300Mbps Wireless N Nano Router
Figure 6-3 WPS
- 132 -