Reboot; Password - TP-Link TL-WR802N User Manual


Note:
The current configuration will be covered by the uploading configuration file. The upgrade process
lasts for 20 seconds and the Router will restart automatically. Keep the Router on during the
upgrading process to prevent any damage.

6.9.7 Reboot

Choose menu "System Tools → Reboot", and then you can click the Reboot button to reboot
the Router via the next screen.
Some settings of the Router will take effect only after rebooting, including:
Change the LAN IP Address (system will reboot automatically).

Change the DHCP Settings.

Change the Wireless configurations.

Change the Web Management Port.

Upgrade the firmware of the Router (system will reboot automatically).

Restore the Router's settings to factory defaults (system will reboot automatically).

Update the configuration with the file (system will reboot automatically.


6.9.8 Password

Choose menu "System Tools → Password", and then you can change the factory default user
name and password of the Router in the next screen as shown in Figure 6-35.
TL-WR802N
Figure 6-34 Reboot the Router
- 157 -
300Mbps Wireless N Nano Router