Wireless; Wireless Settings - TP-Link TL-WR802N User Manual

MAC Address - The physical address of the LAN ports, as seen from the LAN. The value

can't be changed.
Type - Choosing Smart IP (DHCP) to get IP address from DHCP server, or choosing static IP

to config IP address manually.
IP Address - Enter the IP address of your system in dotted-decimal notation (factory default -

192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally

255.255.255.0 is used as the subnet mask.

Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically， while the Virtual Server and
DMZ Host will not take effect until they are re-configured.

6.7 Wireless

Figure 6-10 Wireless menu
There are six submenus under the Wireless menu (shown in Figure 6-10): Wireless Settings,
Wireless Security, MAC Filtering, Wireless Advanced, Wireless Statistics and Throughput
Monitor. Click it, and you will be able to configure the corresponding function.

6.7.1 Wireless Settings

Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings
for the wireless network on this page.
TL-WR802N 300Mbps Wireless N Nano Router
- 138 -