System Tools - TP-Link TL-WR802N User Manual

2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal
notation) of the computer for which you want to reserve an IP address.
3. Click the Save button.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/Disable All button to make all entries enabled/disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the
previous page.
5.9

System Tools

Figure 5-25 The System Tools menu
Choose menu "System Tools", and then you can see the submenus under the main menu:
SNMP, Diagnostic, Ping Watch Dog, Firmware Upgrade, Factory Defaults, Backup &
Restore, Reboot, Password and System Log. Click any of them, and you will be able to
Figure 5-24 Add or Modify an Address Reservation Entry
TL-WR802N 300Mbps Wireless N Nano Router
- 121 -