Operation Mode; Network; Wan - TP-Link TL-WR802N User Manual

2. The WPS function cannot be configured if the Wireless function of the AP is disabled. Please
make sure the Wireless function is enabled before configuring the WPS.

8.5 Operation Mode

The Router supports five operation mode types: Wireless Router, Access Point, Range
Extender, Client and Hotsopt Router. Please select one you want. Click Save to save your
choice, which is shown as Figure 8-7.

8.6 Network

Figure 8-8 The Network menu
There are three submenus under the Network menu (shown in Figure 8-8): WAN, MAC Clone
and LAN. Click any of them, and you will be able to configure the corresponding function.

8.6.1 WAN

Choose menu "Network → WAN", and then you can configure the IP parameters of the WAN on
the screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will
automatically get IP parameters from your ISP. You can see the page as follow (Figure 8-9):
TL-WR802N
Figure 8-7 Working Mode
- 197 -
300Mbps Wireless N Nano Router