Chapter 4
Tips:
Visit
FAQ
if there is no internet connection.
4. 4.
Configure the Router in Access Point Mode
In this mode, your router connects to a wired or wireless router via an Ethernet cable
and extends the wireless coverage of your existing network. Advanced functions like
NAT, Parental Controls and QoS are not supported in this mode.
1. Connect one of the router's LAN ports to the existing network using an Ethernet
cable.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
3. Go to
Advanced
>
router via
http://tplinkwifi.net
4. Go to
Quick Setup
passwords for the wireless network.
Now, you can connect to the SSIDs and enjoy your existing network.
Operation
Mode, select
after the router reboots.
or
Settings
>
Wireless
Set Up Internet Connection
Router
Access Point
and click Save. Log in to the
>
Wireless Settings
and set the SSIDs and
24