Chapter 4
5. Configure LAN ports. Windows users are recommended to choose from the first two
types. Fill in
Address Prefix
Tips:
Find
Help
on the web management page to know more about items.
6. Click
Status
to check whether you have successfully set up an IPv6 connection. The
following figure is an example of a successful PPPoE configuration.
Tips:
Visit the
"FAQ"
section if there is no internet connection.
4. 4.
Configure the Router in Access Point Mode
In this mode, your router connects to a wired or wireless router via an Ethernet cable
and extends the wireless coverage of your existing network. Advanced functions like
NAT, Parental Controls and QoS are not supported in this mode.
provided by your ISP, and click Save.
21