2.
When you upgrade the Router's firmware, you may lose its current configurations, so before
upgrading the firmware please write down some of your customized settings to avoid losing
important settings.
3.
Do not turn off the Router or press the Reset button while the firmware is being upgraded,
otherwise, the Router may be damaged.
4.
The Router will reboot after the upgrading has been finished.
7.9.5 Factory Defaults
Choose menu "System Tools → Factory Defaults", and you can restore the configurations of
the Router to factory defaults on the following screen.
Click the Restore button to reset all configuration settings to their default values.
The default User Name: admin
The default Password: admin
The default access: tplinkwifi.net
Note:
All changed settings will be lost when defaults are restored.
7.9.6 Backup & Restore
Choose menu "System Tools → Backup & Restore", and then you can save the current
configuration of the Router as a backup file and restore the configuration via a backup file as
shown in Figure 7-32.
Click the Backup button to save all configuration settings as a backup file in your local
computer.
TL-WR802N
Figure 7-31 Restore Factory Default
Figure 7-32 Backup & Restore Configuration
- 185 -
300Mbps Wireless N Nano Router