TP-Link TL-WR802N User Manual page 151


Note:
In this example, the default PIN code of this adapter is 16952898 as the above figure shown.
Keep the WPS Status as Enabled and click the Add Device button in Figure 5-3.
Step 2:
Step 3: Choose "Enter the new device's PIN" and enter the PIN code （take 16952898 for
example） of the wireless adapter in the field after PIN as shown in the figure below.
Then click Connect.
Method Three: Enter the PIN from my AP.
Step 1: Get the Current PIN code of the AP in Figure 5-3 (each AP has its unique PIN code. Here
takes the PIN code 12345670 of this AP for example).
TL-WR802N
The WPS Configuration Screen of Wireless Adapter
Figure 6-5 Add A New Device
300Mbps Wireless N Nano Router
- 135 -