Forwarding - TP-Link TL-WR802N User Manual

Modify - To modify or delete an existing entry.

To Reserve an IP address:
1. Click the Add New... button. Then will pop-up.
2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal
notation) of the computer for which you want to reserve an IP address.
Click the Save button.
3.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/Disable All button to make all entries enabled/disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the
previous page.

8.9 Forwarding

Figure 8-33 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 8-33): Virtual Servers,
Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the
corresponding function.
Figure 8-32 Add or Modify an Address Reservation Entry
TL-WR802N 300Mbps Wireless N Nano Router
- 221 -