Unpacking The Projector - Epson EMP-735 Read This First Manual

Unpacking the Projector

When you unpack the projector, make sure that you have all these components.
If any of the components are missing or incorrect, please contact the place of
purchase.
(with lens cover)
(1.8 m (6 ft.))
For connecting the projector
to a wall outlet
(1.8 m (6 ft.))
Use this cable to connect
with a computer that has a
USB port when
communicating using a
wireless mouse
Documentation
Downloaded from:
Projector
Power cable
USB cable
Read This First (this booklet)
Safety Instructions/
World-Wide Warranty Terms
http://www.usersmanualguide.com/
Remote control
(including a CR2025
lithium battery)
Remove the insulating tape
from the battery holder
before using this product
Computer cable
(mini D-Sub 15-pin/mini
D-Sub 15-pin 1.8 m (6 ft.))
For connecting the
projector to a computer
Wireless LAN card
Place this card in the
projector's card slot to
connect the projector to a
computer via a wireless
LAN
Document CD-ROM
Quick Reference Guide
EasyMP Setup Guide
EasyMP software
(CD-ROM)
Place this in the computer
when installing the EasyMP
software
RCA video cable
(1.8m(6 ft.))
Use this cable to connect the
projector to the video device.
Soft carrying case
(with shoulder strap and
handle)
For carrying the projector
3