Unpacking The Projector; Additional Components - Epson PowerLite 830p User Manual

Multimedia
Hide thumbs Also See for PowerLite 830p:
Table of Contents

Advertisement

note
You won't need all these
components; your
configuration will determine
which ones you need.
Welcome
12

Unpacking the Projector

After unpacking the projector, make sure you have all the parts shown
below:
Projector
Power cable
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use a carrying case. See page 13 for ordering information, and
page 100 for transportation instructions.

Additional Components

Depending on how you plan to use the projector, you may need
additional components:
To receive an S-Video signal, you'll need an S-Video cable. One
may be provided with your video equipment, or you can purchase
one from Epson; see page 13.
To receive a component video signal from a VCR or other video
device, you'll need a component video cable. You can purchase
one from Epson; see page 13.
Remote control and
batteries
VGA computer cable
Projector software
CD-ROM
USB cable

Advertisement

Table of Contents
loading

Table of Contents