before using your Kenwood
Read these instructions carefully and
retain for future reference.
Remove all packaging and any
The blades are sharp, handle with
care. Hold the knife blade at
the top away from the cutting
edge, both when handling and
Do not plug the appliance into the
power supply until it is fully
assembled and always unplug
before dis-assembling the appliance
or handling the knife blade.
Remove the knife blade before
emptying the bowl.
Never remove the power unit until
the blade has completely stopped.
Never use an unauthorised
Never use a damaged appliance.
Get it checked or repaired: see
'service and customer care'.
Never let the power unit, cord or
plug get wet.
Don't let excess cord hang over the
edge of a table or worktop or touch
Never misuse your food chopper
and only use it for its intended
Do not use if there is any visible
damage to the appliance.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
Children should be supervised to
ensure that they do not play with the
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
Do not run the food chopper
continuously for longer than 10
seconds. Leave to cool for 1 minute
in between each 10 second
Do not operate the food chopper if
the glass bowl is empty.
Never operate the food chopper with
the bowl filled with liquid.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the power unit.
important - UK only
The wires in the cord are coloured
Blue = Neutral
Brown = Live
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
1 Remove all packaging including the
plastic blade covers from the knife
blade. These covers should be
discarded as they are to protect the
blade during manufacture and transit
2 Wash the parts: see 'cleaning'.
non slip mat