English - Kenwood FPM91 Instructions Manual

safety
Read these instructions carefully and retain for future reference.
G
Remove all packaging and any labels.
G
The blades and discs are very sharp, handle with care. Always hold by
G
the finger grip at the top, away from the cutting edge, both
when handling and cleaning.
Do not lift or carry the processor by the handle - or the handle may break
G
resulting in injury.
Always remove the knife blade before pouring contents from the bowl.
G
Keep hands and utensils out of the processor bowl and blender goblet
G
whilst connected to the power supply.
Switch off and unplug:-
G
before fitting or removing parts;
G G
when not in use;
G G
before cleaning.
G G
Never use your fingers to push food down the feed tube. Always use the
G
pusher/s supplied.
Never fit the blade unit to the power unit without the blender
G
goblet or compact chopper/grinder fitted.
Before removing the lid from the bowl or blender or compact
G
chopper/grinder from the power unit:-
switch off;
G G
wait until the attachment/blades have completely stopped;
G G
be careful not to unscrew the blender goblet or compact
G G
chopper/grinder from the blade assembly.
SCALD RISK: Hot ingredients should be allowed to cool to room
G
temperature before blending.
Do not use the lid to operate the processor, always use the on/off speed
G
control.
This appliance will be damaged and may cause injury if the
G
interlock mechanism is subjected to excessive force.
Always unplug your food processor when not in use.
G
Never use an unauthorised attachment.
G
Never leave the appliance unattended when it is operating.
G
Never use a damaged appliance. Get it checked or repaired: see 'service
G
& customer care'.
Never let the power unit, cord or plug get wet.
G
Don't let excess cord hang over the edge of a table or worktop or touch
G
hot surfaces.
Do not exceed the maximum capacities stated in the recommended speed
G
chart.
3