Usb Port - Silvercrest KH2382 Operating Instructions Manual

Handling and operation
The fi rst symbol blinks.
Press the SEL button to switch between the 3 digits of the title name. The
selected symbol blinks.
Turn the multi controller to set the blinking symbol.
When you have set the desired symbol press the BND/ENT button to show
all titles that begin with the searched for symbol.
NOTICE
► If no titles are found that begin with the set symbol then
with USB and/or SD/MMC) will be shown briefl y and you can carry out
the setting again.
Turn the multi controller to select a title and start playback with BND/ENT.
Search for directories
Press the A/PS button three times. The directory that is currently playing
back appears.
Turn the multi controller to switch between the available directories.
Press the BND/ENT button to select the currently displayed directory. Play-
back of the fi rst title from the selected directory starts immediately.

USB port

The device can handle USB data carriers up to 8 GB. With this the directory
structure may contain a maximum of 1024 folders, 4096 fi les and a directory
depth of 8 levels.
Connecting data carriers
Open the protective cap from the USB port.
Connect your USB device to the port. The device searches for MP3 or WMA
fi les on the data carrier and the notice USB appears in the display.
Place the protective cap back on the USB port when no USB device is con-
nected to avoid contamination.
Car Radio KH 2382
NO MATCH (only
101
GB