Radio Functions; Automatic Station Search - Silvercrest KH2382 Operating Instructions Manual

Handling and operation
Operating mode
Press the MD/LD button to switch between radio reception (frequency in-
dicator), CD/MP3 operation (CD), card slot (SD/MMC), USB port (USB)
and audio input (AUX).
NOTICE
► The operating modes CD, SD/MMC and USB can only be accessed when
the corresponding medium is inserted.
Display
Press repeatedly the DISP button to display successively the following in-
formation:
Radio station, title + interpret, time of day (will automatically be set with RDS recep-
tion), PTY settings (these RDS functions are transmitted by the broadcast institutions in
various formats; see also the chapter "Radio functions") and frequencies.
NOTICE
► When you are not receiving any RDS or PTY information, "PS NONE" or
"PTY NONE" is shown in the display.
Radio reset (RESET)
To reset the device to its factory default settings, press the RESET button with a
pointed object, such as a pen.
Reset the device:
▯ when operating for the fi rst time,
▯ after the cable connection,
▯ if not all function buttons are working
▯ when an error message appears in the display.

Radio functions

Select frequency range
Press the BND/ENT button to switch between USW (FM1, FM2, FM3)
and medium wave (MW1, MW2).

Automatic station search

Press briefl y the buttons I◂◂ or ▸▸I to start a station search. The search will
stop when a station is found.
Car Radio KH 2382
GB
95