Table of Contents
Advertisement
2.
SELF-DIAGNOSIS MODE
The followings are the modes which are added to (or extend) the PPC self-diagnosis function.
Self-diagnosis Modes
Mode
Adjustment mode
[0]+[5]+[POWER]
Setting mode
[0]+[8]+[POWER]
Function setting
[1]+[3]+[POWER]
mode
Country/region set-
[0]+[2]+[POWER]
ting mode
Memory clear mode [1]+[3]+[*]+[POWER]
[1]+[3]+[#]+[POWER]
[START]+[CLEAR/STOP]+[POWER]
[*]+[#]+[POWER]
Test Modes
Mode
AUTO TEST
Press the [USER FUNCTIONS] but-
ton while REDAY is indicated, and
then press the [*], [#], [*], [*] keys.
INDIVIDUAL TEST
TEST RESULT
LIST
FUNCTION TEST
MAINTENANCE
SERVICE LIST
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
For start
Adjusts various items.
Sets various items.
Perform various test for
maintenance.
Sets country/region code
Clear various data in RAM
For start
Use this mode to diagnose
the equipment by automati-
cally performing a series of
tests.
Use this mode to perform a
test dialogically and locate
a failure from the test
result.
Use this mode to print the
results of "AUTO TEST"
and "INDIVIDUAL TEST".
Use this mode to check
each function of the equip-
ment.
Use this mode to perform
setups for Memory Clear,
Fax, etc.
Use this mode to print
PROTOCOL TRACE,
TOTAL ERROR, etc.
2 - 1
Contents
For exit
[POWER]OFF/ON
[POWER]OFF/ON
[POWER]OFF/ON
Contents
For exit
Press the [USER
FUNCTIONS] button,
and then press the [*],
[#], [*], [*] keys.
SELF-DIAGNOSIS MODE
2
-
-
GD-1220/1221
Advertisement
Table of Contents
