Table of Contents
Advertisement
[A] FUNC 0-39
The settings here cover all the functions of this facsimile unit that can be adjusted by a service techni-
cian.
The functions consist of 40 tables in with each table having 8 bits (0 ~ 7).
•
FUNC 0
Bit
7
Terminal ID entry for user mode:
0: Disable
1: Enable
6
Undefined
5
Program Continuous Polling open to users:
0: Disable
1: Enable
4
Exchange Type Setting for User Mode:
0: Disable
1: Enable
3
Dial Type Setting for User Mode:
0: Disable
1: Enable
2
Undefined
1
Undefined
0
Undefined
<Remarks>
FUNC 0 Bit 7:
This bit determines whether or not the Terminal ID programming operation is available to users.
FUNC 0 Bit 5:
This bit determines whether or not the Program continuous polling operation is made available to users.
Note:
Note:
When "Prohibits setting by users" is selected, "PROG. CONT. POLLING" is not displayed in poll-
ing programming.
FUNC 0 Bit 4:
This bit determines whether or not selection between PSTN and PABX is made available to users.
FUNC 0 Bit 3:
This bit determine whether or not selection between DP and MF is mode available to users.
Note:
Note:
When "Disable" is selected, the PSTN/PABX selection screen is not displayed in the dial type
setup menu.
GD-1220/1221
SELF-DIAGNOSIS MODE
Contents
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 14
Link with User
Function Setting
—
—
—
—
—
—
—
—
Advertisement
Table of Contents
