Reception Mode Default Setting - Toshiba e-STUDIO170F Owner's Manual

Toshiba e-studio170f multifunction fax owner's manual
Hide thumbs Also See for e-STUDIO170F:
Table of Contents

Advertisement

Reception Mode Default Setting

The e-STUDIO170F has four
TEL/FAX:
reception modes and the re-
This mode is used when the
ceiving function differs accor-
line is used for both facsimile
ding to the selected mode.
and telephone functions.
The facsimile automatically de-
• AUTO RECEIVE
termines whether an incoming
• FAX/TAD
call is for facsimile or tele-
• TEL/FAX
phone. When the call is for
• MANUAL RECEIVE
telephone, the ringer will ring
according to the value set for
the call time. When the call is
AUTO RECEIVE (FAX):
for facsimile, the machine will
If you use the unit as a fac-
automatically start receiving
simile most of the time, you
the document.
should select this mode. When
the unit receives a call, the unit
MANUAL:
enters the automatic fax recep-
This mode is used when the
tion mode after the selected
facsimile is connected to a line
ring delay.
that is primarily used as a
(voice) telephone line.
FAX/TAD
Upon receiving a ring-in signal,
This mode is used together
pick up the handset to talk with
with a TAD (telephone answer-
the remote party before starting
ing device/machine).
a facsimile communication.
This mode allows you to re-
ceive voice messages and fac-
NOTES:
simile receptions even when no
one is present in the office.
Switching between the voice
message recording and fac-
simile receiving is performed
automatically.
6 2
1
Display the Reception
Mode Menu
Press:
RECEPTION MODE
1.FAX
2.FAX/TAD
3.TEL/FAX
Manual Reception must
be initiated by an opera-
tor. No facsimile receiv-
ing operations will be
possible if no one is
present to initiate the re-
ception.
Only the Reception Mode
can be changed using
AUTO
the
key; number of
rings and timer settings
cannot be changed.
2
Select the Desired Reception Mode
Select the desired Reception
Mode.
MENU
+
(for AUTO RECEIVE)
+
If AUTO RECEIVE is selected,
the following will be displayed.
+
RINGS TO ANSWER
(1-10)
+
Go to Step 3.
(for FAX/TAD RECEIVE)
FAX/TAD TIMER
(0-99)
4.MANUAL
Go to Step 4.
(for TEL/FAX RECEIVE)
TEL/FAX RINGS
(1-15)
[ 6]
[ 2]
Go to Step 5.
(for MANUAL RECEIVE)
If MANUAL RECEIVE is se-
lected, the following will be dis-
played for 2 seconds (continue
to Step 6).
[45]
COMPLETED

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 170f

Table of Contents