DEFOGGING AND DEFROSTING
Inside of the Windshield
0
1. Press the defroster switch.
1
2. Adjust the fan speed with the fan speed control.
2
3. To quickly remove the fog on the glass, set the fan speed
switch at a high speed position.
3
4. To prevent fog from forming on the glass, setting the air
source selection switch to the fresh air intake mode is
4
recommended.
5
Outside of the Windshield
6
1. Press the defroster switch.
7
2. Adjust the fan speed with the fan speed control.
3. To quickly remove the fog on the glass, set the switch to
8
a high speed position.
9
4. Set the temperature control switch to a hot position.
10
WARNING
11
• When it rains and is very humid, you may have fog on the wind-
shield and windows. The fog will block your view through all
12
windows and can create a dangerous situation. To prevent any
fog on the glass, setting the air source selection switch to the
13
fresh air intake mode is recommended.
14
NOTE
15
• When you press this defrost switch, the air conditioner turns on
automatically and the system selects the fresh air intake mode.
16
9-14
VENTILATION, HEATING, AIR CONDITIONING AND AIR PURIFICATION SYSTEM
Automatic Air Conditioner
Manual Air Conditioner
CAUTION
• An extended air conditioner operation in the bi-level mode or
defrost mode may cause the outside glass to fog due to the
high temperature difference between the inside and the out-
side of the vehicle. In this case, change the air flow to the
fresh air intake mode and set the fan at a low speed.
• Especially in winter or summer, to avoid glass fogging, remove
any obstacles such as snow or leaves on the air inlets.
Defroster switch