How To Fasten The Three Point Seat Belt - SSANGYONG 2010 Kyron User Manual

HOW TO FASTEN THE THREE POINT SEAT BELT

1. Pull out the latch plate from the
retractor. If the seat belt is locked
when being pulled out, rewind it com-
pletely in the retractor, then pull it out
to the desired length.
2. Position the shoulder belt across the
body and the lap belt as low as pos-
sible across the hips. Insert the latch
plate into the buckle until it clicks.
3. Adjust the seat belt height as
needed.
CAUTION
Sit back in the seat with the seatback in an
upright position and wear the seat belt.
WARNING
Make sure that the seat belt webbing is
not twisted.
4. Pull the latch plate to make sure it is
securely locked. A slack belt will
greatly reduce the protection afforded
to the wearer.
5. To unfasten the seat belt, press the
red button on the buckle.
WARNING
Improperly worn seat belts could cause
serious injury or death.
• Put the lap belt as low as possible
across the hips. Do not put it across the
waist. In an accident, the belt may apply
pressure to your abdomen. This may
cause internal injuries.
• The shoulder belt should be positioned
midway over the shoulder, never across
the neck.
SEAT BELT AND AIR BAG
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8-5