SSANGYONG 2010 Kyron User Manual page 124

ABS WARNING LIGHT*
0
When the ignition switch is turned "ON", this
1
warning light comes on and goes out if the
system is normal.
2
3
WARNING
4
• If this light doesn't come on when the ignition is switched on or
if this light doesn't go out, contact your nearest Ssangyong Dealer
5
or Ssangyong Authorized Service Center. If this light illuminates
while driving, a malfunction of ABS is indicated.
6
• ABS is a device that prevents wheels from locking during brak-
ing to allow steering. However, the ABS system does not shorten
7
the stopping distance.
8
CAUTION
9
When the engine starts and the vehicle starts to move, ABS per-
forms self diagnosis by transferring hydraulic pressure to the brak-
10
ing units. This may cause some noise and vibrations. This means
ABS is properly functioning.
11
12
ABS (Anti-Lock Brake System)?
13
When braking suddenly or braking on slippery roads, the
vehicle keeps moving forward but the wheels are locking
14
and not rotating. If these happen, your vehicle may lose
stability or rotate resulting in an accident. ABS helps to
15
maintain directional stability and control of the vehicle.
16
6-30
TRANSMISSION AND BRAKE SYSTEM
EBD WARNING LIGHT*
When the ignition switch is turned to "ON",
this warning light comes on and goes out if
the system is normal.
CAUTION
If the EBD warning light stays on, have the system checked at the
Ssangyong Dealer or Ssangyong Authorized Service Center.
EBD (Electronic Brake-force Distribution)?
When the brake pedal is applied, it controls the braking
pressure electronically to effectively distribute the braking
forces to the front wheels and rear wheels. EBD operates
when the speed differences between the most fast front
wheel and the rear wheel are over 1 km/h. If ABS is engaged,
it does not operate.