Safety Mode (Automatic Transmission) - SSANGYONG 2010 Kyron User Manual

Table of Contents

Advertisement

SAFETY MODE (AUTOMATIC TRANSMISSION)

SYMPTOMS
0
When the transmission has an electrical or mechanical fault,
1
the transmission operates in the safety mode to maintain
minimum driving conditions and to prevent the transmission
2
from being damaged.
3
When the transmission is defective, the symptoms that can
occur are as follows:
4
• Heavy shock when moving the selector lever
5
• Decreased driving force while driving at high speed
• Fixed gear position during driving (cannot accelerate the
6
vehicle)
7
CAUTION
8
• If you find any symptoms caused by mechanical or electrical
defects in the transmission, stop the vehicle immediately and
9
reset the safety mode.
• If abnormal operation of the transmission (fixed at the 2nd for-
10
"D"
ward gear in
have the system checked by a Ssangyong dealer or Ssangyong
11
Authorized Service Center.
• If the mechanical or electrical problem still exists, have the sys-
12
tem checked by a Ssangyong dealer or Ssangyong Authorized
Service Center.
13
14
15
16
6-14
TRANSMISSION AND BRAKE SYSTEM
"R"
or 2nd reverse gear in
) still exists,
RESETTING THE SAFETY MODE WHEN
THE GEAR IS FIXED
How to Reset the Safety Mode
1. Park the vehicle and place the selector lever to
2. Stop the engine and wait for more than 10 seconds.
3. Start the engine.
Symptoms After Resetting the Safety Mode
• If the vehicle operates normally after resetting, the prob-
lems are corrected.
• If gear is fixed at the 2nd forward gear in the
tion or the 2nd reverse gear in
checked by a Ssangyong dealer or Ssangyong Authorized
Service Center.
"P"
.
"D"
posi-
"R"
. Have the system

Advertisement

Table of Contents
loading

Table of Contents