Headlight Leveling Switch - SSANGYONG 2010 Kyron User Manual

Battery Saver (Automatically turns off the lights)
0
• To avoid discharging the battery, if the tail lamps are on after the ignition key
is removed, a buzzer will sound to alert the driver when the driver's door is
1
opened. The tail lamps will automatically turn off when the door is closed.(With
the light switch on, if the ignition key is removed and all doors are closed, the
2
tail lamps are off due to the battery saver function. However, if you open a door
and turn the light switch to the "OFF" position and then to the "ON" position,
3
the tail lamps will stay on after the door is closed.)
4
• To turn the tail lamps on again, insert the ignition key into the ignition switch.
Or, turn the light switch to the "OFF" position and then to the "ON" position.
5
6
7
8
9
10
LIGHT SWITCH
11
12 (Headlamps ON)
13 Head-, side-marker, tail, license plate, fog,
and instrument cluster lamps come on.
14
15
(Tail lamps ON)
16
Side-marker, tail, license plate, fog, and
instrument cluster lamps come on.
4-6
INTERIOR SWITCHES
AUTO
(Automatic light ON)
Head- and tail lamps automatically
turn on or off based upon the intensity
of the sunlight analyzed by the auto-
matic light sensor.
(Lights OFF)
OFF
All lights are off.
HEADLIGHT LEVELING
SWITCH*
With the low beam switched on, ad-
just the aiming angle of headlights to
suit the vehicle load.
• To lower the aiming angle, rotate the
switch counter-clockwise.
• To raise the aiming angle, rotate the
switch clockwise.
NOTE
According to load condition, adjust the
aiming angle of headlights.