Table Of Contents - Fargo C50 Service Manual

Contents
1 Introduction ______________________________________________________________ 4
1.1 Safety Messages (review carefully) _______________________________________________ 4
1.2 Tools need for Card Printer repair- replacement procedures __________________________ 6
2 Cover Removal Procedures __________________________________________________ 7
2.1 Remove/Replace Printer Covers _________________________________________________ 7
2.2 Remove/Replace Printer Top Cover/PCB display ___________________________________ 10
3 Parts Replacement- Printer _________________________________________________ 11
3.1 Remove/Replace the Mainboard _______________________________________________ 11
3.2 Remove/Replace the Stepper Drive Motor (D930027) Remove/Replace Stepper Belt F000424
Remove/Replace Pulley D900430 ____________________________________________________ 13
3.3 Remove/Replace the Mag Roller (D930122) ______________________________________ 19
3.4 Remove/Replace the Output Roller (D930123) Remove/Replace Pinch Roller-spring
(D920013-F000338)________________________________________________________________ 22
3.5 Remove/Replace the Platen Roller (D930120) & Pulley/Gear (D900429) ________________ 24
3.6 Remove/Replace the Lift Pinch Roller Assembly (D930137), Remove/Replace Pinch Lift
Bracket (D930136) ________________________________________________________________ 27
3.7 Remove/Replace the Cleaning Roller (D930121), Remove/Replace Input Feed Lever
(D930132), Remove/Replace Input Lever Gear (D930164) _________________________________ 32
3.8 Remove/Replace Supply Spindle RFID Motor (D930015-01) __________________________ 34
3.9 Remove/Replace Ribbon Take-Up Motor (D930014) ________________________________ 36
3.10 Remove/Replace Encoder Sensor (A930514) for RFID Supply Spindle/ Cable (D930605),
Remove/Replace PCB board (A000365-01) _____________________________________________ 38
3.11 Remove/Replace the PCB board (A000365-01) __________________________________ 42
3.12 Remove/Replace Ribbon Sensor (D930016) _____________________________________ 43
3.13 Remove/Replace Card Path/Cover Sensor (D930613) _____________________________ 46
3.14 C50 Printhead procedure ____________________________________________________ 48
4 Appendix D Printer Mainboard connections ___________________________________ 60
5 Appendix E Engineering Drawings __________________________________________ 63
August 2013
HID GLOBAL CONFIDENTIAL AND/OR PROPRIETARY INFORMATION. This document contains confidential and/or proprietary information,
which may not be duplicated, published, disseminated or disclosed, or used for any purpose, without the written consent of HID Global
Corporation. If you are an unintended recipient of this information or are unwilling to accept the above restrictions, please immediately return
this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106..
C50 Card Printer Service Manual PLT-01278 rev 1.1
Page 2