Cover Removal Procedures; Remove/Replace Printer Covers - Fargo C50 Service Manual

2

Cover Removal Procedures

2.1

Remove/Replace Printer Covers

Step Procedure
1
Caution: Turn OFF the Printer and unplug the power cord from the Printer.
2 Open the front door. Locate and remove the 2 screws. (F000178)
3 Lift up the top cover and disconnect the display cable (D930607) from the main board.
Remove the top cover by flexing the center to disengage the insert tabs.
August 2013
HID GLOBAL CONFIDENTIAL AND/OR PROPRIETARY INFORMATION. This document contains confidential and/or proprietary information,
which may not be duplicated, published, disseminated or disclosed, or used for any purpose, without the written consent of HID Global
Corporation. If you are an unintended recipient of this information or are unwilling to accept the above restrictions, please immediately return
this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106..
C50 Card Printer Service Manual PLT-01278 rev 1.1
Tools needed: T10 Torx screwdriver
Estimated Repair Time: 15 minutes
Preparation:
Important: This procedure can only be performed
by authorized service personnel.
Top Cover/PCB Assy
Front Door
Left Cover
Right Cover
Back Cover
Output Bin
D930034-03
D930265-03
D930263-04
D930264-03
D930270-01
D930269-01
Page 7