Table of Contents
Advertisement
Step
Procedure
11
Fit the Mount behind the tab on the printers side plate frame. This locks the mount in place.
12
Secure the stepper drive assembly with 2 screws (F000171) with 2 washers (140040),
and one screw (F000178) at the specific locations shown.
NOTE: Lightly tighten all screws first then tighten the (F000171) screws last.
August 2013
HID GLOBAL CONFIDENTIAL AND/OR PROPRIETARY INFORMATION. This document contains confidential and/or proprietary information,
which may not be duplicated, published, disseminated or disclosed, or used for any purpose, without the written consent of HID Global
Corporation. If you are an unintended recipient of this information or are unwilling to accept the above restrictions, please immediately return
this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106..
C50 Card Printer Service Manual PLT-01278 rev 1.1
Page 17
Hide quick links:
Advertisement
Table of Contents
