Resolving A Headlift Motor Or Sensor Error - Fargo HDP100 User Manual

RESTRICTED USE ONLY

Resolving a Headlift Motor or Sensor Error

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: The Printhead continuously cycles or does not cycle at all

Printer Error State: Headlift Sensor is not detecting movement from the
Headlift Cam.

LCD Error Display: Headlift Error

Driver Monitor Error Display: General Error
2 Press the Cancel Print button on the Driver Monitor Error Display Message.
HDP100 High Definition Card Printer/Encoder User Guide (Rev. Beta)
Fargo Electronics, Inc.
64