Installing The Burner Components - Dacor Epicure ER36D Installation Instructions Manual

I
nsTallIng The
WarnInG: Never attempt to operate the cooktop section of
the range with any of the burner rings, burner caps, or grates
removed.
◊
Remove the burner rings, burner caps, and grates from their
shipping packages.
◊
Install the burners as shown. The location, type, and size of
the burners varies with the range model number.
◊
Gently set the grates on top of the spill tray. Put the legs
of each grate inside the corresponding dimples. On model
ER36D, the largest grate goes in the center.
STeP 3: Install burner
cap. Ridge on cap must
surround top of ring.
STeP 2: Install
burner ring. Line up
ring tabs with head
slots. Twist back
and forth to assure
proper seating.
STeP 1: Install
burner head. Put
locating tap in
keyed hole.
Keyed hole
crown Burner Installation
I
nsTallaTIon
b C
urner omponenTs
WarnInG
ridge on bottom
of burner cap
Burner ring
Burner head
Burner Base
I
nsTruCTIons
crown Burner
STeP 3: Install burner
caps. Ridge on cap must
surround top of ring.
STeP 2: Turn ring until
it drops into place. Twist
back and forth to assure
proper seating.
STeP 1: Put burner ring
on top of base.
Stack Burner Installation
Spill Tray
Stack Burner
ridge on bottom
of burner cap
Burner ring
Burner Base