Installing The Burner Components; Cooktop Assembly - Dacor ER36D Installation Instructions Manual

Cooktop Assembly

Never attempt to operate the range's cooktop with any of the
burner rings, burner caps or grates removed.
• Remove the burner rings, burner caps and grates from their
shipping packages.
• Install the burners as shown. The location, type and size of
the burners varies with the range model number.
• Gently set the grates on top of the spill tray. Put the legs
of each grate inside the corresponding dimples. On model
ER36D, the largest grate goes in the center.
STEP 3: Install burner
cap. Ridge on cap must
surround top of ring.
STEP 2: Install
burner ring. Line up
ring tabs with head
slots. Twist back
and forth to assure
proper seating.
STEP 1: Install
burner head. Put
locating tab in
keyed hole.
Keyed
hole
Crown Burner Installation
Installation Instructions
WARNING
Ridge on
bottom of
burner cap
Burner ring
Burner head
Burner base
Crown burner
STEP 3: Install burner
caps. Ridge on cap must
surround top of ring.
STEP 2: Turn ring until
it drops into place. Twist
back and forth to assure
proper seating.
STEP 1: Put burner
ring on top of head.
Stack Burner Installation
Spill tray
Stack burner
Ridge on
bottom of
burner cap
Burner
ring
Burner
head
17