Setting Your Own Station Call Sign - Yaesu FT5DR Instruction Manual

Setting your own station call sign

Register your own station call sign in order to send and receive messages and to transmit
beacons in APRS. Enter the call sign like "W6DXC-7". The "-7" in the call sign indicates
the SSID (Secondary Station Identifier) of which there are 16 types, including one with no
SSID. Generally, the SSIDs shown in the table below are used in APRS.
SSID
NIL Fixed stations that can exchange mes-
sages
-1 1200 bps narrow-to-middle band digipe-
ater
-2 9600 bps digipeater
-3 1200 bps broadband digipeater
-4 Digipeater, mobile station, meteorological
station, etc.
-5 Operation station using mobile devices
(smartphones etc.)
-6 Operation station for satellite communica-
tions, events, etc.
-7 Use of FT5D etc. in handy terminals
1
Press and hold the [F
The text input screen will be displayed.
2
Input the call sign in the alphabet and numeric input
screens
Refer to "Text input screen" (FT5DR/DE Operating Man-
ual) for instruction to enter the call sign.
Up to 6 digits can be entered for the call sign.
[If no SSID is set]
Proceed to Step 4 to set the SSID.
3
Press the PTT.
The call sign will be registered and the display returned to the operating screen.
[If a SSID is set]
4
Touch [ ]
5
Touch the SSID you want to set
We recommend that the SSID be set to "−7" in this device.
6
Press the PTT.
The SSID will be registered and the display returned to the operating screen.
Description
] key → Touch [APRS] → [23 CALLSIGN (APRS)].
MENU
SSID
-8 Marine mobile stations, land mobile sta-
tions
-9 Using the FTM-300D etc. for mobile ap-
plications
-10 I-Gate station, Internet connection station
-11 Balloons, aircraft, spacecraft, etc.
-12 1-way tracker station (messages cannot
be exchanged)
-13 Meteorological station (weather station)
-14 Tracking mobile stations
-15 Digipeater, mobile station, meteorological
station, etc.
5
Description