Other Display Settings; Screen Saver; Inputting The Call Sign - Yaesu FT-710 Operation Manual

Other display settings

• Screen Saver

A Screen saver, to prevent burning of the TFT
screen will operate after a set time, if no trans-
ceiver function is operated.
1. Press the [FUNC] knob.
2. Touch [DISPLAY SETTING] or rotate the
[FUNC] knob to select [DISPLAY SETTING]
and then press the [FUNC] knob.
3 . T o u c h [DISPLAY] → [SCREEN SAVER]
or rotate the [FUNC] knob to select an item
and press the [FUNC] knob.
4. Rotate the [FUNC] knob, or touch "<" or ">"
on either side of the value to select the time
until the screen saver is employed (default
setting is 60 min).
OFF Screen saver is not employed.
15min Screen saver activates after 15 minutes.
30min
Screen saver activates after 30 minutes.
60min Screen saver activates after 60 minutes.
5. Press the [FUNC] knob to save the new set-
ting.
6. Touch [BACK] several times to return to nor-
mal operation.

• Inputting the Call Sign

Registered call signs names, and characters can
be displayed on the opening screen when the
power is turned ON.
1. Press the [FUNC] knob.
2. Touch [DISPLAY SETTING] or rotate the
[FUNC] knob to select [DISPLAY SETTING]
and then press the [FUNC] knob.
3. Touch [DISPLAY] → [MY CALL] or rotate the
[FUNC] knob to select the item and press the
[FUNC] knob.
4. Touch a character key. The touched character
will be displayed at the top of the screen. En-
ter each character of your call sign.
Up to 12 characters (letters, numbers, and
symbols) can be entered.
The input switches between lower and up-
Caps
per-case letters each time this symbol is
touched.
One character to the left of the cursor is
erased when this symbol is touched.
The display returns to the previous screen
BACK
when this symbol is touched.
27