Toshiba T3300SL Maintenance Manual page 93

(3) Remove the Diagnostic Disk from the FDD, insert the source disk, and press any key.
The following message will appear, indicating the program has started.
[ FDD TYPE ] : TRACK
[ FDD TYPE ] : HEAD
[ FDD TYPE ] : SECTOR = xx
Copy start
(4) Remove the source disk from the FDD, insert a formatted work disk, and press any
key. The [[ track,head
copying to the target disk. When the amount of data is too large to be copied in one
operation, the message in step (2) is displayed again.
After the floppy disk has been copied, the following message will appear.
Copy complete
Another copy (1:Yes/2:No) ?
(5) To copy another disk, type 1 and the message in step (1) will be displayed again. If
you type 2, the display returns to the DIAGNOSTICS MENU.
4. DUMP option
(1) When DUMP is selected, the following message appears.
DIAGNOSTICS—HARD DISK & FLOPPY DISK DUMP : Vx.xx
Format type select (0:2DD-2DD,1:2D-2D,2:2D -2HD,3:2HD-2HD)?
(2) Select a format type number and then type the number. If 3 is selected, the display
will go to the message in step (5) below.
0:
1:
2:
3:
(3) If 0, 1, or 2 is selected, the following message will appear.
Select FDD number (1:A/2:B) ?
(4) Select an FDD drive number and the following message will appear.
Insert source disk into drive x:
Press any key when ready.
[[ track,head
=
Displays a dump list for a floppy disk (2DD).
Displays a dump list for a floppy disk (2D).
Displays a dump list for a floppy disk (2HD).
Displays a dump list for a hard disk.
= xxx
= x
=
xxx x ]] message will appear and start
xxx x ]]
3-47