Accessing The Setup - Toshiba T3300SL Maintenance Manual

BATTERY SAVE OPTIONS
CPU super sleep mode
HDD auto off
FDD auto off
Display auto off
System auto off
LCD brightness

3.22.2 Accessing the SETUP

Select the SETUP function by typing 0 from the DIAGNOSTICS MENU and pressing Enter. A
display similar to the following will appear.
MEMORY
Total
Base
Shadow BIOS ROM
Extended
Hard RAM
DISPLAY
Display Adaptor
LCD Display Mode
LCD Gray Scale Level= Normal 32 Levels
HARD DISK
Capacity
POWER ON PASSWORD
Not Registered
TIME & DATE
15:05:16, Thu May 07, 1992
: Select items, Space,BkSp : Changes values,
ESC : Exit without saving, Home : Set default values, End : Save and reboot
This display is an example of the setup options as they currently may be stored in memory. The
display you see may be different from the one above. The available setup options for the display are
dependent on the value selected for "Display Adapter."
Notice that selecting the type of diskette drive is not an option. The T3300SL automatically deter-
mines what type of internal diskette drive is installed. Also, you don't have to run the SETUP
function to use an external 5.25-inch diskette drive.
Press ESC if the setup options displayed accurately reflect your hardware configuration and no
changes are necessary. The following message is displayed.
Exit Without Saving? (Y/N)
Press Y and the system returns to the DIAGNOSTICS MENU.
T3300SL SETUP
Serial Port
= 2048KB
= 640KB Card Modem
= 128KB
= 1280KB External FDD/PRT
= 0KB Printer Port Type
= VGA Compatible
Resume Mode
Battery Save Mode
= Color Processing Speed
Cache
Popup
Speaker
= 80MB
Battery Alarm
Panel Power On/Off = Disable
Alarm Power On
COM/PRT/FDD
= COM1(IRQ4/3F8H)
= COM2(IRQ3/2F8H)
= Printer
= Output
OTHERS
= Boot
= Long Life
= High
= Enable
= Enable
= On
= On
= Disable
3-51