Installing The Battery Terminal Assembly - Toshiba T3300SL Maintenance Manual

4.5.2 Installing the Battery Terminal Assembly

NOTE: The battery terminal assembly is the last item to be installed before installing the
bottom cover on the T3300SL.
1. Route the battery terminal cables under the flexible HDD cable. Connect the cables to
PJ2 and PJ3 on the power supply board (Figure 4-10).
2. Place the battery terminal assembly at the end of the battery pack case just in front of the
HDD. Align the two screw holes on the battery pack case with the battery terminal assem-
bly. Secure the battery terminal assembly with the two M2x6 screws (Figure 4-10).
3. Secure the HDD cable and battery terminal cables with tape (Figure 4-11).
Figure 4-11 Taping the HDD and Battery Terminal Assembly cables
4. Secure the PS/2 mouse cable and RTC battery cable to the edge of the FDD with tape.
4-18